Loam, rain, flames, boric acid, Timbits

Per the recent fire ban in Calgary, we had to cover the ground around the Serpent with dirt to help dampen the ground and help prevent any errant fires from catching the dry earth. We spent Tuesday morning shoveling piles of fresh loam around, while doing the few last repairs and tweaks ahead of our final fire inspection.


Shoveling and raking loam all over the area beneath the Snake. photo by Denise


Sam rakes loam, and Denise eats PTFE tape while swapping our some vertebrae plumbing. photo by Ted


Margaret talking with the fire marshals, meeting all of their questions and concerns with objective and thoughtful responses to why everything we do is perfectly safe. photo by Denise


pwWWOOOOFFFF: a loud, hot diesel shot for an already-toasty day. photo by Denise

Here is a short video of the diesel shots. (Please forgive me for shooting it vertical, but it is way too tall to capture it any other way!) What you can’t feel from watching it is how absurdly HOT it was, even as far away as I was standing. You also can’t see the enormous black plumes of smoke that hung in the air and gently drifted towards the city… and yes, yes the fire department received many concerned phone calls about this. Again. They’re absolutely aware of us and what we’re doing though — we telephone them directly 30 minutes before every big shoot. So it’s cool.

After a long day of work, a few of Calgary’s own Blazin’ Lily Gals met us on site and we did a safety training and site walk-through with them to get them oriented to how we run a show. Then we walked back to the hotel and feasted on delicious Indian food and beers, and hung out for a long time swapping Burning Man tales, art build stories and other adventures. We are so stoked to have a crew of experienced locals who will be helping us out with fire safety all through Beakerhead!

This morning we woke up to discover it had rained steadily all night long, and was significantly chillier and windier than yesterday! Good thing we have new coveralls for this gig, because all that freshly spread loam…  turned into a swamp.

denise on egg controls Suzanne

Our day-time diesel shot happened during low winds and a slight rain, but conditions were still acceptable for us to shoot. Our audience was mostly school kids who came out to see the Snake during class. Margaret and Andrea on the ball valve, Denise on the egg shooter controls. photo by Rhiannon


In the middle of this morning’s rainy wind, Paul of the Blazin’ Lily Gals came through with some hot Tim Horton’s coffee and a box of tasty Timbits! Canadian hospitality is AWESOME! <3 <3 photo by Denise

After our morning show, we spent our afternoon going for walks around the city, hanging out in the hotel hot tub, napping, and generally catching up after 4+ days of non-stop build. Then it was time to head back for our night shows.


Robin, Hethur, Margaret and Ted putting their mud-caked shoes and coveralls back on, OUTside our nice clean hotel. photo by Denise

Robin dancing by Andrea

Hooray, the rain stopped! Robin spins in her spiffy coveralls while we trudge back to the Fort Calgary site for our evening show. photo by Rhiannon


Margaret and Denise crush up lithium in a mortar and pestle and funnel it into a fresh barrel of liquid methanol. photo by Ted


Sam fills the large pressure vessel with salted methanol, ahead of our first shot of the night. photo by Denise


Our hero engineer Mike Prados arrived on site today, and settled in immediately driving the hydraulics that control the Snake’s head. Here is a throwback shot of him at the shop in 2006, posing with the newly-constructed mandible subassembly. photo by Michelle P


Ted fills the pressure vessel with methanol mixed with boric acid for our 2nd show of the night. Boric acid makes green fire! photo by Denise

rhiannon pic

Rhiannon got this gorgeous shot of the underlit vertebrae and the continuous flames.


We are getting a lot of media interest this week. Watch Andrea and Robin explain the basics of the Serpent in a quick 30-second montage that was published on Global News today. (Our part starts about 22 seconds in.)

And the CBC did a short video of us as well, featuring our daytime diesel shots from this morning’s show for the local schools.

And Margaret was on live TV yesterday morning! Actual video soon, but here is a literal screen-shot:

margaret on tv

photo by Sam

Dispatch from the field: Calgary, Alberta

We’ve just wrapped up Day 3 of the Serpent Mother build, our contribution to this year’s Beakerhead arts and science festival. This streamlined build crew of only 7 FLGs went from an open field on Saturday morning to running a full fire-test by Monday night. We are having an outstanding build; here are the pictures to tell the tale.


Hethur watches for clearance while the hed rack emerges. We pack our containers to the brim! photo by Denise


The head rack is by far the heaviest thing in this container. photo by Denise


Sam, Ted, Andrea and Hethur pull this vertebrae rack out with all their might. photo by Denise


Our fabulous heavy machinery operator Corey carries the vertebrae rack across the field of Fort Calgary. photo by Denise


The head rack lifts apart and requires a whole lot of pipe carrying to unload. photo by Denise


Denise unbolts vertebrae sections from their rack. photo by Ted


Ted and Andrea act as placeholders for the egg, while Sam bolts together the vertebrae. photo by Denise


This is our entire build crew: Suzanne on the ladder, Sam securing a ratchet strap, Andrea pulling on it to orient the spine, Corey in the VR, Margaret guiding his moves, Ted getting ready to spud the flange, Hethur at the ready with nuts and bolts. (and Denise behind the camera)


The spine is coming along… we start at the tip of the tail and build outwards. photo by Denise


Sam bolts the spine together. photo by Denise


The end of Day 1. Ted modeling our to-do list for the next day. photo by Denise


Sam and Margaret working on the vertebrae that interface with the neck hydraulics. photo by Ted


Sam and Ted trade tools as we plug in the last few vertebrae before the head. photo by Denise


Corey and Suzanne do some reptilian dentistry. The Serpent has 56 teeth that feature Venturi fire effects, and two big fangs with static flames. photo by Denise

suzanne pic

The crew at the end of Day 2.


Some entertaining artifacts from the birth of the Serpent — different experiments in how to make the flame effects in the teeth work best. photo by Denise


By nightfall tonight, we had assembled all the plumbing and electronics and were ready to test our systems. First we tested all the vertebrae with nitrogen gas, to look for leaks and to make sure the continuous and poofer systems were all cooperating. Then we shot plain old water out of the egg shooter, to make sure the six different nozzles were pointing in the right directions. Once those systems were dialed in, we decided to try it with more combustible materials — propane for the snake’s body, and diesel for the egg.

Our propane poofs and diesel shots were so high and so bright, that concerned citizens as far as 15 kilometers away called the Calgary Fire Department. Within minutes of our first shot, we had lights and sirens flying up the block to investigate. And of course once we explained what was happening, the firefighters all wanted to push the buttons too!


The Calgary Fire Department was IMPRESSED. photo by Denise

Thanks to long days and a hard-working crew, we are moving along at an excellent clip on this build. Tomorrow we do some more testing and some final adjustments, and the rest of our crew arrives!

today on the BRC blog: our art-sisters in Calgary!

We are brimming with pride today as we read the latest Burning Man blog post. It’s a profile of the Blazin’ Lily Gals, our art sisters in Calgary, Alberta. The BLG have been creating lovely for some time now, and they credit FLG with inspiration! We’ll be visiting with them next month when we bring the Serpent Mother to Beakerhead!


three BLGs in the shop, mugging with tools of the trade. photo by Sarge, from Sprocket’s blog article

Read the whole thing here!



ok folks, set humor to low-brow… and check out our HOT PINK BOXES!

In the early days of FLG, we used to use these metal ammo cans in our sculptures to house electronics.


But in the 11 years since the Serpent was born, we’ve had to open them up and dig around in them to fix stuff enough times that we’re ready to upgrade to an easier layout/configuration. Maybe something that’s more environment-proof. In subsequent sculptures we’ve been using Pelican cases, and more recently a similar brand called Seahorse boxes. Since we’re redoing all of Snakey’s electronics, it was time to source some new relay boxes.

A quick Amazon search yielded our replacement items; we knew it instantly when we saw the picture. We were so excited, we could only communicate in frantic pointing and yelping. When they arrived in the mail, they came in this packaging:


extreeeeeme happiness? that’s a tall promise… photo by Denise



holy, fucking, shit. photo by Denise

We set to work carving out their side walls to house our panel mount connectors.


Margaret’s socks and Robyn’s nail polish match our new relay boxes, and the universe is in perfect harmony. photo by Ted

PINK BOXES YOU GUYS.  It’s like they KNEW. Come see the Serpent Mother at Beakerhead this September and you too will know our glee.